Performance Evaluation of Self-Propelled Planter with Electronic Seed-Metering System
DOI:
https://doi.org/10.48165/jefa.2025.20.2.34Keywords:
Blackgram, precision planting, hilly areas, taguchi method and planter with electronic seed metering systemAbstract
In Indian agriculture, seed placement is one of most crucial operations as it affects seed germination, growth and the productivity. Further, in narrow terraces of North Eastern Hilly Region of India, uses of tractor operated planters and other conventional plantersare not feasible. In addition, commercially available planters use mechanical metering which has many limitations including, skidding of the wheel, non-uniform seed rate, wastage of the seed and higher maintenance cost. Therefore, a lightweight self-propelled planter is required for timely operation with less drudgery in terraced terrain with a vertical interval more than 1 m. The seed plates powered by electric or hydraulic motors can effectively prevent the seed irregularities caused by wheel slippage on the ground and vibrations, thereby increasing the working speed and improving seeding accuracy. In order to deal such issues, an ergonomically designed planter with electronic seed metering system was developed. The performance results were analyzed and results with minimum value of missing index, multiple index, precision index and mean seed spacing as 5, 3.34, 16.23 per cent and 10.76 cm and highest value of quality of feed index of 91.67 per cent were recorded at groove size 5.45 mm, 25 per cent hopper fill level and running speed 1 km h-1 respectively.
Downloads
References
Abdeen, M. A., Salem, A. E., and Zhang, G. (2021). Longitudinal Axial Flow Rice Thresher Performance Optimization Using the Taguchi Technique. Agriculture, 11(2): 88.
Asiltürk, I., and Akkus, H. (2011). Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method. Measurement, 44:1697–1704.
DAFW. (2023). Department of Agriculture and Farmers Welfare, Ministry of Agriculture and Farmers Welfare, Government of India. agricoop.nic.in. Accessed 5th January, 2023.
He, X., Cui, T., Zhang, D., Wei, J., Wang, M., Yu, Y., and Yang, L. (2017). Development of an electric-driven control system for a precision planter based on a closed-loop PID algorithm. Computers and Electronics in Agriculture, 136: 184-192.
IS 6316: (Part 1): 1993. Test code for sowing equipment –seed-cum fertilizer drill, Bureau of Indian Standards, Manak Bhavan, New Delhi, India.
Kepner, R.A., Bainer, R and Barger, E.L. (1987). Principles of Farm Machinery. 3rd Edition. CBS Publishers and Distributors, New Delhi.
Köksoy, O., and Muluk, F.Z. (2004). Solution to the taguchiâs problem with correlated responses. Gazi Univ. J. Sci., 17:59
Kumar, V. J. F., and Durairaj, C. D. (2000). Influence of head geometry on the distributive performance of air-assisted seed drills. J. Agric. Eng. Res., 75: 81-95.
Leela, C., and Saravanakumar, M. (2019). Development of Electronically Meterized Maize Planter. Int.J.Curr.Microbiol.App.Sci., 8(4): 2432-2440.
Li, Y., Xiantao, H., Tao, C., Dongxing, Z., Song, S., Zhang, R., and Mantao, W. (2015). Development of mechatronic driving system for seed meters equipped on conventional precision corn planter. International Journal of Agricultural and Biological Engineering, 8(4): 1-9.
Mezarcioz, S. M., and Ogulata, T. R. (2011). The Use of Taguchi Design of Experiment Method in Optimizing Spirality Angle of Single Jersey Fabrics. Texstil Ve Konfeksiyon, 4: 374 - 380.
Palanikumar, K.J.M (2011). Experimental investigation and optimization in drilling of GFRP composites. Measurement, 44: 2138–2148.
Sharma, V. K., Sharma, D. N., and Kumar, D. (2013). Development and evaluation of tractor drawn inclined cell plate type Bt cotton planter. International Journal of Agricultural Engineering, 6(2), 329-334.
Sikkim. (2023). Department of Agriculture, Sikkim agrisnet, Government of Sikkim. sikkimagrisnet.org. Accessed 7th January, 2023.
Singh, M. K., Kumar, N., Verma, P., and Garg, S. K. (2012). Performance evaluation of mechanical planters for planting of chickpea and pigeonpea. Journal of Food Legumes, 25(2): 131-134.
Yadachi, S., Mani, I., Kalra, M. S., Kumar, A., and Sahoo, P. K. (2013). Development and evaluation of inclined plate metering mechanism for carrot seed. Journal of Agricultural Engineering, 50(2), 10-16.
Yazgi, A., and Degirmencioglu, A. (2007). Optimisation of the seed spacing uniformity performance of a vacuum-type precision seeder using response surface methodology. Biosystems engineering, 97(3), 347-356.
